Personalising Recipes - BORETTI BPO-45 Notice D'emploi

EN
Note: at any moment, if you make a mistake choosing the values and/or you want to change the settings of your
recipe, you can select
NOTE: If you are cooking with the modified parameters of a pre-set recipe, while the oven beeps at the end of
cooking, you will see:

Personalising recipes

Once you have changed the cooking time of a preset recipe and executed it, you can save it for the
next by storing the new parameters you used (weight and cooking time).
At the end of the cooking cycle of the modified recipe, the icon below will appear and, to save it,
proceed as follows:
- with the + key select "YES"
- confirm with
- change it with + and - and confirm with
- change it with + and - and confirm with
"Recipe saved POS. 001", and so on, in ascending order
Each time you access the "PERSONAL RECIPES" menu, you will find it saved in your recipes.
When finished with the settings, the display summarizes the recipe
set. The colon in the cooking time (00:30) will be flashing to indicate
that it can be changed.
To change it, use the - + buttons.
Or select the
program starts with a countdown of the preset time on the display.
ATTENTION: certain recipes use pre-heating, so put the dish in when the oven has
reached the set temperature and the display shows "PRE-HEATING FINISHED PUT IN
THE DISH"
When cooking is finished the display will flash "PROGRAM FINISHED REMOVE THE
DISH" and, at the same time, the oven will beep until you press a key or open the door.
which cancels it and allows you start over from the beginning of the procedure.
see how to save recipes in the next paragraph.
the time used is displayed,
function directly and, in this way, the cooking
, the weight used appears,
, you will see the message
60