Electrical Section - BORETTI CFBG901AN Prescriptions De Montage Et Mode D'emploi

9

ELECTRICAL SECTION

IMPORTANT: The cooker must be
installed in accordance with the
manufacturer's instructions.
Incorrect installation, for which
t h e m a n u f a c t u r e r
responsibility,
persons or animals etc.
GENERAL
• Connection to the mains must be
carried out by qualified personnel in
accordance with current regulations.
• The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical
cable sections can withstand the load
specified on the plate.
• The plug must be connected to an
earthed socket in compliance with
safety standards.
• The appliance can be connected
directly to the mains placing an
omnipolar switch with minimum
opening between the contacts of 3
mm between the appliance and the
mains.
• The power supply cable must not
touch the hot parts and must be
positioned so that it does not exceed
75°C at any point.
• Once the appliance has been
installed, the switch or socket must
always be accessible.
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must
be interrupted.
a c c e p t s
may cause injury to
N.B. For connection to the mains, do
not use adapters, reducers or brancing
devices as they can cause overheating
and burning.
If the installation requires alterations to the
n o
domestic electrical system or if the socket
and appliance plug are incompatible, call
an expert.
He should also check that the socket
cable section is suitable for the power
absorbed by the appliance.
IMPORTANT: this cooker must be
conected to a suitable double pole
control unit adjacent to the cooker.
WARNING!
This appliance must be earthed.
The connection of the appliance to
earth is mandatory.
T h e m a n u f a c t u r e r d e c l i n e s
a l l r e s p o n s a b i l i t y
inconvenience resulting from the
none observance of this condition.
f o r a n y
237