Programming The Timer: Minute-Counter - BORETTI BPO-45 Notice D'emploi

EN
The oven goes to standby mode, turning off the oven light.

Programming the timer: minute-counter

The minute-counter is a function of the timer that is independent from the operation of the oven, i.e., it
does not stop cooking or turn off the oven but functions as an alarm. You can set it at any time, such as
to remind you when to check cooking on the burners, in addition to the oven, or for other kitchen tasks.
It is even available when the oven is off and, in this case, just touch the timer function symbol one time.
But, if you are using it with the oven on, you must touch the time function symbol three times:
Touch the "+" and "-" symbols to set the minutes.
The countdown starts now. After the indicated time passes, the over will and the dedicated symbol will
flash: press any button to stop the beep.
Programming the timer: cancelling the program
To cancel a program, you must set the previously assigned value to zero or turn on the oven.
The control automatically turns the oven on at 11:00 (13:00-2:00) and turns it off at
13:00. The roast will be ready when you return!
Now, set the end-of-cooking time: the
control normally adds the cooking time
to the current time, so it proposes an
end-of-cooking time, which in our case
would be 10:30 (8:30+2:00).
Change the end-of-cooking time to what you want,
in our example 13:00
The separator dots flash to indicate you can set the
time.
58