Télécharger Imprimer la page

Stihl SR 430 Notice D'emploi page 30

Masquer les pouces Voir aussi pour SR 430:

Publicité

Les langues disponibles

Les langues disponibles

English
28 Intake Screen
29 Air Filter
30 Spacer
# Serial Number
25.1
Definitions
1. Container Cap
For closing the container.
2. Container
Contains the material to be sprayed.
3. Lever
2)
Locates the container in position onto the
metering unit.
4. Metering Unit
2)
Allows to operate in mistblowing mode, or
dusting and spreading mode.
5. Spark Plug Boot
Connects the spark plug with the ignition
lead.
6. Carburetor Adjusting Screws
For tuning the carburetor.
7. Manual Fuel Pump
Provides additional fuel feed for a cold start.
8. Choke Knob
Eases engine starting by enriching mixture.
9. Starter Grip
The grip of the pull starter, for starting the
engine.
10
Fuel Filler Cap
.
For closing the fuel tank.
11
Fuel Tank
.
For fuel and oil mixture.
12
Muffler with Spark Arresting Screen
.
Muffler reduces engine exhaust noises and
diverts exhaust gases away from operator.
Spark arresting screen is designed to reduce
the risk of fire.
13
Antistatic System
.
Reduces the risk of sparking, when applying
any dry substance.
14
Baffle Screen
.
To vary the direction and shape of the spray.
1)
not Fitted on all Markets
2)
only SR 450
30
2)
15
Metering Knob
.
For varying the spraying rate.
16
Nozzle
.
Mounted on blower tube, directs airstream.
17
Blower Tube
.
Directs the airstream.
18
Throttle Trigger
.
Controls the speed of the engine.
19
Control Handle
.
Handle on the flexible hose to hold and direct
the tube in the required direction, held by the
right hand.
20
Setting Lever
.
For run and stop. Sets the throttle to various
positions or stops the engine.
21
Valve Lever for Solution Feed
.
Opens and closes spray liquid hose.
22
Throttle Trigger Lockout
.
Must be depressed before the throttle trigger
can be activated.
23
Metering Lever for Dusting and Spreading
.
2)
Mode
For infinitely varying the discharge rate.
24
Pleated Hose
.
For blowing in the desired direction.
25
Harness
.
For carrying the unit.
26
Backplate
.
Helps protect the back of the user.
27
Back Padding, small
.
Increases carrying comfort.
27
Back Padding, large
a.
Increases carrying comfort.
28
Intake Screen
.
Helps prevent leaves entering intake.
29
Air Filter
.
Prevents dust and foreign matter from enter‐
ing the carburetor.
30
Spacer
.
Designed to reduce the risk of burns and fire.
25 Main Parts
1)
1)
1)
0458-454-8221-F

Publicité

loading

Ce manuel est également adapté pour:

Sr 450