Stihl SR 430 Notice D'emploi page 21

13 Dusting and Spreading Mode
Solution container
A
B
The selected operating mode is indicated by the
symbols on the metering unit's housing.
► Position A – Mistblowing mode
► Position B – Dusting and spreading mode
► Insert a suitable tool (e.g. screwdriver) in the
two recesses (arrows) to loosen the
strainer (1).
► Pull the strainer (1) upward and out of the sol‐
ution container.
0458-454-8221-F
► Squeeze the tabs (2) together and pull the
lever (3) outwards.
► Remove the solution container from the meter‐
ing unit's housing (4) and turn it to position B
(dusting and spreading mode).
► Thoroughly clean the plastic pins and the seal‐
ing face on the solution container – check that
there is no residue.
► Thoroughly clean the holes and sealing face
on the metering unit (4) – check that there is
no residue.
► Fit the solution tank on the metering unit's
housing (4).
English
2 2
4
4
21