Stihl SR 430 Notice D'emploi page 31

26 Specifications
26 Specifications
26.1 EPA / CEPA
The Emission Compliance Period referred to on
the Emissions Compliance Label indicates the
number of operating hours for which the engine
has been shown to meet Federal emission
requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
26.2 Engine
Single-cylinder two-stroke engine
Displacement:
Cylinder bore:
Piston stroke:
Engine power to ISO 7293: 2.9 kW (3.9 bhp)
Idling speed:
26.3 Ignition system
Electronic magneto ignition
Spark plug (suppressed): NGK BPMR 7 A,
Electrode gap:
This spark ignition system meets all require‐
ments of the Canadian Interference-Causing
Equipment Standard CAN ICES-2/NMB-2.
26.4 Fuel system
All-position diaphragm carburetor with integral
fuel pump
Fuel tank capacity:
26.5 Blowing capacity
Air speed:
Max. air flow rate without
blower tube:
Air throughput with nozzle: 920 m
26.6 Spraying Attachment
Tank capacity:
Quantity left in tank:
Size of filler strainer mesh: 1 mm
Spraying distance, horizon‐
tal:
Discharge rate (horizontal,
without pressure pump,
with standard dosage
piece):
Discharge rate (horizontal,
with pressure pump, with
"pressure pump" dosage
piece):
0458-454-8221-F
3
63.3cm
48 mm
35 mm
3000 rpm
Bosch WSR 6 F
0.5 mm
3
1700 cm (1.7 l)
90 m/s
3
1300 m /h
3
/h
14 l
50 ml
14.5 m
0.11 – 3.28 rpm
1.12 – 3.86 rpm
26.7 Weight
unfilled:
SR 430:
SR 450:
Max. weight capacity of solution container:
SR 450:
27 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).
28 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
English
12.2 kg
12.8 kg
14 kg
31