Gima SP-20 Mode D'emploi page 51

51
4.3.1 User ID
On main menu screen, move the cursor on "User ID" and press Confirm key "
then the oximeter enters into User ID Setup screen, as shown in figure 4.4.
Move the cursor on "Edit" and press Confirm
key " "; when the cursor turns to blue,
then the user can edit the User ID, and move
the cursor on "OK" to confirm the edit, the edit
screen is as shown in figure 4.4B.
4.3.2 User
On main menu screen, move the cursor on "User" and press Confirm key "
then the oximeter enters into Patient type Setup screen, as shown in figure 4.5.
Figure 4.5 Patient type setup screen
Figure 4.4A User ID setup screen
Figure 4.4B User ID edit screen
ENGLISH
",
",