Gima SP-20 Mode D'emploi page 151

151
Conducted RF
IEC61000-4-6
Radiated RF
IEC61000-4-3
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
III EMC Compliance - ENGLISH
0,15MHz–
80MHz
3 V RMS
outside the
ISM band, 6
V RMS in the
ISM
80 MHz to 2.7
GHz
3V/m
Portable and mobile RF
communications equipment
should be used no closer to
any part of The Handheld
Pulse Oximeter, including
cables, than the recommen-
0,15MHz–
ded separation distance
80MHz
calculated from the equation
3 V RMS
applicable to the frequency of
outside
the transmitter.
the ISM
Recommended separation
band, 6
distance
V RMS in
the ISM
d=1.2
d=1.2
80MHz to 800MHz
80 MHz to
d=2.3
2.7 GHz
800MHz to 2.5GHz
3V/m
Where P is the maximum
output power rating of the
transmitter in watts (W)
according to the transmitter
manufacturer and d is the
recommended separation
distance in metres (m). b
Field strengths from fixed RF
transmitters, as determined
by an electromagnetic site
survey ,a should be less than
the compliance level in each
frequency range .b
terference may occur in the
vicinity of equipment marked
with the following symbol.
P
\* MERGEFORMAT
P
\* MERGEFORMAT-
P
\* MERGEFORMAT-
\* MERGEFORMATIn-