Gima SP-20 Mode D'emploi page 54

Off, Power Saving etc.) are the same with date setting.
4.3.7 Settings
On main menu screen, move the cursor on "Settings" and press Confirm key "
then the oximeter enters into system setting screen, as shown in figure 4.10.
Figura 4.10
System
setting screen
Description:
• Brightness: To set the brightness of backlight, 6 levels for optional, the factory
default is level 3, as shown in figure 4.10A.
• Volume: To set the sound volume (including alert sound, pulse beep sound and key
click sound), 6 levels sound volume for optional, the factory default is level 3, as
shown in figure 4.10B.
• Pulse beep: To turn on/off pulse beep, the factory default is "On", as shown in figure
4.10C. If the global sound is enables by longtime pressing
beep is set to "On" option, and when there is no over-limit event, then pulse beep
sound can be heard during SpO
• Language: This oximeter provides the display with two languages: English and Sim-
plified Chinese, the factory default is "English", as shown in figure 4.10D.
• Auto power off: To turn on/off the Auto Power Off mode, the factory default is "On",
as shown in figure 4.10E.
• Wireless: To turn on/off the wireless connection function, the factory default is "On",
as shown in figure 4.10F.
• Power saving mode: To turn on/off the Power Saving mode, the factory default is
"On", as shown in figure 4.10G.
• TEMP unit: To set the temperature unit, "°C (Celsius)" and "°F (Fahrenheit)" for op-
tion, the factory default is "°F", as shown in figure 4.10H.
• Factory Default: Enter into the factory default setting, as shown in figure 4.10I.
ENGLISH
measurement.
2
, key, and the pulse
54
",