Regency City Serie Manuel D'utilisation Et D'installation page 50

CITY SERIES
consignes d'installation
13. Option 1 (When venting the exhaust at the right end): Install 2 top
(Part D) and 2 inner diagonals (Part L) with 2 screws at each end.
D
14. Option 2 (When venting the exhaust through the middle): Install 2
3RD ANGLE
PROJECTION
top (Part D) and 1 inner diagonals (Part L) with 2 screws at
DIMENSIONS
each end.
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 =
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR =
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
D
3RD ANGLE
PROJECTION
DIMENSIONS
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 =
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES ANGULAR =
50 | Foyer City Series CB50E THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
920-718a
D
L
L
TOLERANCES UNLESS
FIREPLACE PRODUCTS
OTHERWISE STATED
INTERNATIONAL
0.000 = 0.01 CRITICAL
1:24
SCALE:
0.031
vkrishnamurthy
DWN:
1
E.C.N.:
D
L
TOLERANCES UNLESS
FIREPLACE PRODUCTS
OTHERWISE STATED
INTERNATIONAL
0.000 = 0.01 CRITICAL
1:24
SCALE:
0.031
vkrishnamurthy
DWN:
1
E.C.N.:
COMBINED VIEW OF ALL THE PARTS
H
E
G
EXPLODED VIEW OF THE FRAMING KIT
3RD ANGLE
PROJECTION
DO NOT SCALE
DRAWING
-
MAT'L :
UNITS IN INCHES
SHEAR/ PUNCH/ FORM
PROCESS :
CITY 48 BAY ASSEMBLY
PART :
8/1/2023
PART NO:
DATE:
482-502
SIGN: DATE:
3RD ANGLE
PROJECTION
DO NOT SCALE
UNITS IN INCHES
-
MAT'L :
SHEAR/ PUNCH/ FORM
PROCESS :
CITY 48 BAY ASSEMBLY
PART :
8/1/2023
PART NO:
DATE:
482-502
SIGN: DATE:
4
K
B
J
D
D
L
A
J
L
B
C
A
K
TOLERANCES UNLESS
OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
0.000 = 0.031
0.000 REF = REFERENCE ONLY
ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
REV:
-
TOLERANCES UNLESS
OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN C
REV:
-
I
J
H
F
G
J
FIREPLACE PRODUCTS -
MAT'L :
INTERNATIONAL
SHEAR/ PUNCH/ FORM
PROCESS :
1:24 CITY 48 BAY ASSEMBLY
SCALE: PART :
8/1/2023
vkrishnamurthy PART NO:
DWN: DATE:
482-502
E.C.N.: SIGN: DATE:
FIREPLACE PRODUCTS -
MAT'L :
INTERNATIONAL
SHEAR/ PUNCH/ FORM
PROCESS :
1:32 CITY 48 BAY ASSEMBLY
SCALE: PART :
7/11/2023
PART NO:
DWN: DATE:
482-502
E.C.N.: SIGN: DATE:
09.07.23
RE
-