Error Messages; Bluetooth ® Connection; Use Of The Iconsole+ App - Skandika CARDIOCROSS CARBON PRO II Instructions De Montage Et Mode D'emploi

Error messages

"---- " " ----" means, that the contact to the handpulse sensors was not sufficiently for a
measurement. The reason for this can be that you have not grasped the two sensors correctly.
Start a new measurement with correctly placed hands!
"E-1" means, that no heart rate signal has been detected.
"E-4" appears, if the fat % or BMI values are too low (<5) or too high (> 50).
In case of any abnormal functions, disconnect the device from power source and reconnect
after some minutes.
Bluetooth connection
®
The computer can be connected via
refer to the app instructions accordingly.

Use of the iConsole+ app

Your item is compatible with the following iOS- resp. Android devices:
iOS-devices:
iPod touch* (4th generation)
iPod touch* (3rd generation)
iPhone* 4S
iPhone* 4
iPhone* 3GS
iPad* 2
iPad*
The iConsole+ app enables you to control your training and show the different function valu-
es on your compatible mobile device. Additionally, you may share your training results with
your friend through mobile networks, like Facebook or Twitter.
In order to establish a proper connection, Bluetooth needs to be enabled on your device.
Download the app „iConsole+" and install it onto your iOS- or Android-device. You may use
the app search function of your device or the following QR codes to find the app:
42
Bluetooth
®
to communicate with iconsole+ app. Please
Android-devices:
Android tablet OS 4.0 or higher
Android tablet 1280X800 pixel
Android phone OS 4.0 or higher
Android phone 800X480 pixel