Folding Mechanism - Skandika CARDIOCROSS CARBON PRO II Instructions De Montage Et Mode D'emploi

Folding mechanism

Folding
Step 1:
1. Start on one side, pull the pedal high and move the pedal arm in the highest position.
2. Pull the hook (146) from the mounting frame (L) (148).
3. Hold the side cover (52) with one hand (Caution: See to it that your fingers are not trapped bet-
ween side cover and pedal floor panel to avoid the pinching of fingers), pull the hook (146) high
with other hand and position the hook like a circular extension on the corresponding equipment
(150) in the available recess.
Step 2:
Here, carry out the same procedure as in step 1.
Step 3:
1. Release the knob (145) by turning in the counter clockwise direction.
2. Pull out the knob (145) to open the latch.
3. Pull the rail link (15) high until the knob (145) is latched (Caution: Pay attention to the "clicking
noise" while latching in order to ensure the closing) and turn the knob in clockwise direction to
fix it.
Step 4
The folding ends now.
Step 1 Step 2 Step 3 Step 4
35