Skandika CARDIOCROSS CARBON PRO II Instructions De Montage Et Mode D'emploi page 36

Folding mechanism
Unfolding
Step 1:
1. Release the knob (145) by turning in counter clockwise direction.
2. Pull out the knob (145) to open the latch.
3. Pull down the rail link (15) until the knob (145) latches and turn it in clockwise direction to fix it.
Step 2:
Mount the hook (146) on the mounting frame (L) (148) as specified in the circular extension, hold the
side cover (52) with one hand and lift the hook (146) lightly to remove it from the equipment. Lay the
roll on the guide rail.
Caution: This step must take place in the reverse sequence as in case of folding. In case of difficulties,
fold the other side first.
Step 3:
1. Assemble the hook (146) on the mounting frame (L) (148).
2. Repeat the same procedure on the other side.
Step 4
The opening process is completed.
Step 1 Step 2 Step 3 Step 4
36