Brandt BFP2521X Instruction Utilisateur page 136

Caring for and cleaning your appliance
IMPORTANT:
Make sure to note the fitting
orientation of the first glass
A
panel (shiny surface towards
you)
Remove the first glass panel: the door consists of two inside glass panels, with a black rubber spacer at
each corner. If necessary, remove the inside panels to clean them.
Do not soak the glass panels in water. Rinse with clean water and dry off with a lint-free cloth.
• Reassembling the oven door glass panels
After cleaning, reposition the four rubber stops with the arrow upwards and reposition all of the glass
panels.
Insert the last glass panel into the stops, reposition the rail and screw it back in. Remove the plastic wedge
before closing the door. Your appliance is now ready to use again.
• Replacing the light bulb
IMPORTANT:
Make sure the appliance is disconnected from the power before replacing the bulb in order to
avoid the risk of electric shock. Change the lamp only when the appliance has cooled down.
18
A
Bulb details:
25 W, 220-240 V~, 300°C, G9 cap.
You can replace the bulb yourself. Unscrew the
view port and remove the bulb (use a rubber
glove, which will make it easier to remove). Insert
the new bulb and replace the view port. This prod-
uct contains a light source with energy rating G.