Motorola DTR600 Mode D'emploi page 54

English
Receiving radio displays Data Receiving
momentarily followed by power cycle, and then
displays Radio Disabled.
NOTE:
The remote disable fails if the followings
happen:
• Target radio is out of range.
• Target radio is transmitting or receiving
data or call.
• Target radio is disabled or is powered
down.
• Manager radio records a wrong hopset of
the target radio.
A disabled radio can only power up, off, or
accept remote enable message.
7.6.2
Remote Enable
Radios configured as Manager allows a disabled radio to
be enabled.
54
1 Press Menu/OK→Advanced→Manager Mode.
2 To enable the target radio, press Remote
Enable→Menu/OK.
The radio displays the contact list.
3 Scroll to the required contact and press Menu/OK.
If successful, the Manager radio displays a positive
mini notice.
If unsuccessful, the Manager radio displays a
negative mini notice.
7.6.3
Remote Monitor
Radios configured as Manager Mode are able to remotely
monitor and listen to the environment of the other radio for
30 seconds provided the target radio is in the range.
1 Press the Menu/OK→Advanced→Manager
Mode→Remote Monitor.