Motorola DTR600 Mode D'emploi page 16

English
a battery lasts. A battery which is overcharged and
discharged 100 % for several times a day, lasts fewer
cycles than a battery that overcharges less and is
discharged to 50 % per day. Battery with minimal
overcharge and has an average of 25 % discharge, lasts
even longer.
Motorola Solutions batteries are designed specifically to be
used with a Motorola Solutions charger and vice versa.
Charging batteries with non-Motorola Solutions equipment
may lead to battery damage and void the battery warranty.
Whenever possible, maintain the battery temperature to 77
°F (25 °C) (room temperature). Charging a cold battery
(below 50 °F [10 °C]) may result in leakage of electrolyte
and ultimate failure of the battery. Charging a hot battery
(above 95 °F [35 °C]) results in reducing discharge
capacity and affecting the performance of the radio.
Motorola Solutions rapid-rate battery chargers contain a
temperature-sensing circuit to ensure that batteries are
charged within the temperature limits.
1.4.2
Battery Recycling and Disposal
Lithium-ion rechargeable batteries can be recycled.
However, recycling facilities may not be available in
all areas. Under various U.S. state laws and the laws
16
of several other countries, batteries must be recycled
and cannot be disposed of in landfills or incinerators.
Contact your local waste management agency for specific
requirements and information in your area. Motorola
Solutions fully endorses and encourages the recycling of
Lithium-Ion batteries.
In the U.S. and Canada, Motorola Solutions participates in
the nationwide Call2Recycle program for battery collection
and recycling. Many retailers and dealers participate in
this program. For the location of the drop-off facility
closest to you, access Call2Recycle's Internet web site
at https://www.call2recycle.org/
The internet site and telephone number also provide
other useful information concerning recycling options for
consumers, businesses, and governmental agencies.
1.4.3
Installing the Li-Ion Battery
1 Align the battery contacts with the contacts inside
the battery compartment. Insert the contact side of
the battery first. Gently push the battery into place
and ensure the position of the battery flap is on top
of the battery.
or call 1-800-8-BATTERY.