If...
Then...
If your voice is
perform the following actions:
not transmitted
•
Ensure that the PTT button is
or received,
completely pressed when trans-
mitting.
•
Ensure that the radios have the
same settings, and the same
PROFILE ID.
•
Before talking, wait until you
hear the Talk Permit Tone.
Speaking before hearing the
tone results in the first few words
of the transmission being cut out.
•
Recharge, replace, or reposition
the batteries. See
fications on page
•
Change to a location with no in-
terference.
If you hear
ensure that transmitting and receiv-
heavy static or
ing radios are at least five feet
interference,
apart.
If...
If the battery is
low,
If low battery in-
dicator is blink-
ing although
new batteries
are inserted,
If the battery
does not charge
Battery Speci-
although it has
15.
been placed in
the drop-in
charger for a
while,
Then...
recharge or replace the battery.
NOTE:
Extreme operating tem-
perature may affect bat-
tery life. See
Battery
Specifications on page
15.
refer to
Installing the Li-Ion Battery
on page 16
and
Battery Specifica-
tions on page
15.
perform the following actions:
•
Verify that the drop-in tray charg-
er is properly connected and cor-
responds with a compatible pow-
er supply. See
Charging with the
Drop-In Tray Single-Unit Charger
(SUC) on page 21
and
a Stand-Alone Battery on page
22.
English
Charging
67