Motorola DTR600 Mode D'emploi page 32

English
3.10
Call All Available
You can perform group call to all users available on
different channels, and users who are not in an on-going
radio conversation. The Call All Available feature does not
interrupt ongoing communications.
You have the option to program the Call All Available
feature into Programmable button, or assign to a channel
using the Customer Programming Software (CPS).
The Call All Available feature allows a communication with
all available radio users at once in a temporary "super
channel" group, without having to change through each
channel individually.
When a caller initiate the Call All Available transmission,
the Programmable button is disabled in all radios involved.
The Private Reply feature or Direct Call feature is disabled
during this period.
The radio times out a Call All Available communication after
four seconds of inactivity. The time out prevents all users
from being tied up indefinitely in an unnecessary group
conversation. .
3.10.1
32
Starting Call All Available
By default, the Programmable button is set to Private
Reply feature.
NOTE:
Programmble button must be pre-programmed
to Call All Available using Advanced Settings or
Customer Programming Software (CPS).
1 Press the Programmable button.
The display shows Call All Available On,
indicating that you are in a queue.
2 When your radio is in a queue, press the PTT button.
The display shows Call All Available.
3 Wait for the Talk Permit Tone to end and speak.
3.11
Page All Available
You can communicate with all available radio users at
once without having to change through each channel