Motorola DTR600 Mode D'emploi page 29

number in order to communicate. You need to make sure
self contact hopset is matching to the Profile ID hopset.
To change the group Profile ID number, refer to the
Advanced Settings on page
3.4.1
Setting the Non-Interference or Privacy
Feature
This feature ensures improved private communications by
configuring an appropriate PROFILE ID number.
IMPORTANT:
By default, the PROFILE ID number is "0000".
Ensure that all your radios are configured with
the same PROFILE ID number and is easy to
remember.
The Profile ID feature is enabled through Customer
Programming Software (CPS) configuration.
1 Press Menu/OK→Advanced→PROFILE ID.
2 Enter a four-digit radio PROFILE ID number.
3.5
44.
Talk Range
Talk range is the distance or the communication range
of radios. Key considerations that affect range are: signal
type, antenna, and obstructions. You can communicate
with a radio or a group of radios with the same
configuration.
Table 12: Talk Range
Model Steel or Con-
crete Industrial
Buildings
ISM 900 MHz Up to 350,000 ft²
3.6
Programmable Button Options
The Programmable button comes pre-programmed with
the Private Reply feature.
By using Customer Programming Software (CPS) or the
Advanced Settings of your radio, you can also configure
the Programmable button to allow other call features, such
as Page All Available, Call All Available, Direct Call, and
English
Multi-Level
Buildings
Up to 30 floors
29