Motorola DTR600 Mode D'emploi page 50

English
6 Ensure that the two radios are both from the same
frequency band, and same region.
NOTE:
The cloning cable is designed to operate only
with compatible Motorola Solutions SUC.
When ordering cloning cable kit, ensure to order the
cloning cable kit with part number HKKN4028_ For more
information about the accessories, see
page 75
7.5.4
Cloning PROFILE ID Number Through
Wireless
The PROFILE ID Number Wireless Cloning feature is
useful when you want to clone the PROFILE ID Number
for all the radios in your fleet but you do not want
to clone particular radio settings that may be unique
for each radio (like Programmable button configuration,
Microphone Gain, Radio Name and others). It is also useful
if you do not have a programming cable, or PC available
to use with the Customer Programming Software (CPS)
configuration.
50
The Profile ID feature is enabled through CPS
configuration.
Accessories on
If successful:
•
1 Power the Target Radio and perform the following
actions:
a Press the Menu/
OK→Advanced→Cloning→Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
2 Power the Source Radio and perform the following
actions:.
a Press the Menu/
OK→Advanced→Cloning→Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
c Press the Menu/OK button.
The display shows Profile ID Cloning...
The display shows Cloned Successfully.