Checchi & Magli WOLF Manuel D'installation Et D'entretien page 69

Replacing the planting unit chain
UN41 0097GF
Proceed as outlined below.
1) Unscrew the nuts (A).
2) Remove the casing (B).
3) Remove the joining link (C).
4) Remove the chain (D).
Replacing the brushes
UN41 0100GF
Proceed as outlined below.
1) Unscrew the screws (A).
2) Remove the brushes (B).
Scrapping the work vehicle
The scrapping operations must be handled by special-
ised personnel with suitable skills for the job.
The components removed must be sorted according to
English language
INFORMATION CONCERNING REPLACEMENTS
B A
5) Fit the new chain on the pinions and on the chain
tensioner (E).
6) Remove the joining link (C).
7) Fit the casing (B).
8) Tighten the nuts (A).
3) Fit the new brushes and tighten the screws (A).
the type of materials they contain and in compliance
with the laws in force concerning "waste collection, sort-
ing and disposal".
32
8
B
Use and maintenance