Checchi & Magli WOLF Manuel D'installation Et D'entretien page 68

Replacing the driving wheels pinion
C
E D
UN41 0095GF
Proceed as outlined below.
1) Turn the levers (F) to slacken off the chain.
2) Unscrew the nuts (A) and remove the casing (B).
3) Move the tensioner (C) and remove the chain from
the pinion (D).
4) Unscrew the screw (E) and remove the pinion (D).
Replacing the driving wheels chain
C
D
UN41 0096GF
Proceed as outlined below.
1) Turn the levers (E) to slacken off the chain.
2) Unscrew the screws (A) and remove the casing (B).
English language
INFORMATION CONCERNING REPLACEMENTS
F
5) From the range of pinions (G), select the most suit-
able pinion to obtain the required plant spacing.
6) Fit the new pinion and tighten the screw (E).
7) Fit the chain on the pinion.
8) Fit the casing (B) and tighten the nuts (A).
E
3) Move the tensioner (C) and remove the chain (D).
4) Fit a new chain.
5) Fit the casing (B) and tighten the screws (A).
31
G
F
B
E
B
Use and maintenance
8
A
A