Planting depth adjustment
UN41 0080GF
Proceed as outlined below.
1) Turn the handwheel (A) to increase or decrease the
planting depth.
The planting depth can be further increased or de-
creased by raising or lowering the packing wheels.
Adjusting the planting force (load applied to ground)
UN41 0084GF
Use handwheel (A) to ) decreases the weight on the pa-
cking wheels.
Use handwhee (B) to increases the weight on the pa-
cking wheels.
English language
ADJUSTMENT INFORMATION
To adjust the packing wheels, proceed as outlined be-
low.
1) Lift the packing wheels off the ground.
2) Loosen the screws (B) on each packing wheel.
3) Raise or lower the wheels as required for the purpos-
es of the job in hand.
4) Tighten the screws (B).
5) Lower the wheels onto the ground.
17
5
A
Use and maintenance