Checchi & Magli WOLF Manuel D'installation Et D'entretien page 62

Changing the tilt of the cups
The cups only need to be tilted if the seedlings need to
be planted through plastic mulch and widely spaced.
Tilting the cups means the mulch sheet will rip less.
Cups positioned upright
B
UN41 0088GF GB
To change the cup tilt angle, proceed as outlined below.
1) Check that the dispenser and the cups can move
freely.
2) Unscrew the screws (A).
Transit on public roads
Danger - Warning
It is prohibited to carry people and/or things on the
work vehicle.
Before any on-the-road driving remove all the trays
from the tray holder and clean the working and
pneumatic parts to remove any soil residues.
A
UN41 0101GF
English language
INFORMATION FOR USE
Arrange the cups in the same way for all the work units.
C A
A
C
C
A
A C
3) Align the unused holes (C) in the plate (B) with the
4) Tighten the screws (A).
When transporting the work vehicle / tractor assembly,
the regulations of the highway code must always be
complied with.
The three-point hitch must be secured with the relative
bars (A) to prevent the work vehicle swinging and the
speed of travel must be adjusted to prevent loss of con-
trol of the vehicle.
25
Cups positioned at an angle
B
screw fastening (A) holes.
6
Travel direction
Use and maintenance