Checchi & Magli WOLF Manuel D'installation Et D'entretien page 45

Optional accessories
The following chart shows the optional accessories available for installation.
Information about the accessories (fitting, use, etc.) is provided with the said accessories.
Manual lift row tracers (max. row spacing: 110 cm)
Manual lift row tracers (max. row spacing: 150 cm)
Inter-cup watering device
300 l tank for one row (for models without manure spreader only)
300 l tank for two rows (for models without manure spreader only)
300 l tank for three rows (for models without manure spreader only)
300 l tank for four rows (for models without manure spreader only)
Sloping box holder
Plant box
Insert for 4x4 cm cubic root balls (standard cup)
Insert for 4x4 cm cubic root balls (5x5 cup and long cup)
Ø 70 mm extender insert for leafy plants (up to three cups and without watering device only)
Special cushioned seat
Min. 30 cm row spacing kit (for WOLF/2 only)
Fastwolf facilitator (for seedlings with conical and pyramid-shaped root balls - dispenser with 4, 5, 6 cups - min. 40 cm
row spacing)
Transversal 2-shelf tray holder (shelf size: 150 cm)
Transversal 2-shelf tray holder (shelf size: 200 cm)
Transversal 2-shelf tray holder (shelf size: 250 cm)
Transversal 2-shelf tray holder (shelf size: 300 cm)
2-shelf tray holder (350 cm), complete with rear frame and support wheels
2-shelf tray holder (400 cm), complete with rear frame and support wheels
Brush kit for external drilling cup cleaning
Hiller disk kit (Ø 410 mm)
Front flex compactor roller (Ø 250x200)
Long drilling cup
6x6 drilling cup
Planting unit locking kit (raised WOLF)
Microgranular fertiliser spreader (with linear dispensing function and mechanical transmission)
Manure spreader (with linear dispensing function and mechanical transmission)
Root ball separator with depth adjustment feature (not compatible with Front Flex compactor roller)
Drilling cups inserts
In the event of differences between the seedlings, suit-
able inserts can be placed in the drilling cups in order
to improve planting precision and to prevent damage to
the plant's leafy fronds.
Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.
English language
TECHNICAL INFORMATION
If necessary, contact the manufacturer to obtain the rela-
tive inserts.
It is up to the tractor driver to assess the environmen-
tal conditions of the work area and not to exceed the
permitted gradients established for the tractor with the
equipment mounted on it (see tractor user manual).
8
2
Use and maintenance