Publicité
Les langues disponibles
Les langues disponibles
3.
CorrECT usE
incorrect use of the electromotive rotary actuator can be dan-
gerous to people, nearby equipment and the environment.
•
The rotary actuator can be used to actuate fittings, especially
ball valves or shut-off flaps.
•
During use observe the permitted data, the operating condi-
tions and conditions of use specified in the contract documents
and operating instructions, as described in chapter 6.System
Description.
•
The device may be used only in conjunction with third-party
devices and components recommended and authorised by
Bürkert.
•
Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and
problem-free operation.
•
Use the device only as intended.
3.1.
restrictions
If exporting the system/device, observe any existing restrictions.
All manuals and user guides at all-guides.com
Type 3005
Correctuse
3.2.
foreseeable misuse
•
The electromotive rotary actuator Type 3005 must not be used in
areas where there is a risk of explosion (in this case please use
type 3004).
•
Do not put any loads on the housing (e.g. by placing objects on it
or standing on it).
•
Do not make any external modifications to the device housings.
not paint the housing parts or screws.
•
Do not install the actuator with the cover facing down (head first).
english
Do
7
Publicité
