Publicité
Les langues disponibles
Les langues disponibles
procedure:
→
Loosen left cable gland 15 and feed through the cable to be
connected.
→
Connect cable according to the circuit diagram (see
diagram) to the terminal strip Pos. 14 of the power supply card.
Connecting additional feedback
The limit switches for the feedback are suitable for a
maximum voltage of 250V AC/DC - 5A.
The rotary actuator features two limit switch contacts which are sup-
plied by the factory in an open position. These can be used for the
feedback of the rotary actuator.
The limit switch contacts are actuated via two cams no. 13.
•
The white cam is used to record the opening process (FC1).
•
The black cam is used to record the closing process (FC2).
procedure:
→
Connect cable to the terminal strip 12 according to the
schematic.
All manuals and user guides at all-guides.com
Type 3005
Installation
Fig. 22: Circuit
9.3.
Control card
for rotary actuator with analogue control
D
E
I
B
H
G
C
J
Fig. 23:
Control card (24V AC/DC)
no.
Designation
a
24V AC/DC power supply
b
Connection terminals
transducer
C
Connection terminals
feedback
D
Adjusting button <MEM>
E
Adjusting button <CLOSE>
english
A
F
K
L
M
N
no.
Designation
h
K2 plug-in jumper
i
K3 plug-in jumper
J
Green and red LEDs
k
Yellow LED: power supply
display
l
Potentiometer
27
Publicité
