Publicité
Les langues disponibles
Les langues disponibles
reverse direction of rotation
→
Press <CLOSE> push-button and switch on
the card (hold down push-button).
The RED LED lights up.
R
→
Release <CLOSE> push-button and dis-
connect the card from the power supply.
specify control signal type
Control signal when voltage 0 – 10 V
→
Press <MEM> push-button and switch
on the card (hold down push-button).
The RED LED lights up 3x.
R
→
Release <MEM> push-button and dis-
connect the card from the power supply.
Control signal when current 0 ... 20 ma
→
Press <MEM> and <OPEN> push-
buttons and switch on the card (hold
down push-button).
The RED LED lights up 3x.
R
→
Release <MEM> and <OPEN> push-
buttons and disconnect the card from
the power supply.
All manuals and user guides at all-guides.com
Type 3005
Installation
Control signal when current 4 ... 20 ma (preset)
→
The RED LED lights up 3x.
R
→
learning mode
specify end positions
→
The RED and the GREEN LED's light
up.
G
R
→
Both LED's go out.
Learning mode is selected.
→
R
The RED LED lights up.
english
Press <MEM> and <CLOSE>
push-buttons and switch on the card
(hold down push-button).
Release <MEM> and <CLOSE>
push-buttons and disconnect the
card from the power supply.
Press <OPEN> and <CLOSE>
push-buttons and switch on the
card (hold down push-button).
Release <OPEN> and <CLOSE>
push-buttons.
Press <CLOSE> push-button to
move the shut-off valve into the
closed position.
29
Publicité
