Monogram ZIC363IPVLH Instructions D'installation page 63

Installation Instructions - Door Panels - Single Door Models
STEP 2 PANEL INSTALL & ADJUSTMENT (Cont.)
8. Repeat steps 3-7 for the convertible drawer.
9. Repeat steps 3-7 for the freezer drawer.
10. Tighten all screws once you are satisfied with the
panel alignment.
11. Install G1 brackets on back side of refrigerator panel.
For Stainless Steel Panels: Use the M4 machine
screws provided with the stainless steel panel kit.
For Custom Panels: Use #6 phillips head wood
screws provided with refrigerator.
D1
G1
E1
31-1000708 Rev. 0
A1
G1
G1
B1
12. Clip trims onto brackets to hide the panel adjustment
hardware.
13. Add trim caps to cover the ends of the trim.
63