Monogram ZIC363IPVLH Instructions D'installation page 60

Installation Instructions - Door Panels - Single Door Models
HARDWARE SUPPLIED (per unit)
36 Phillips #6 Wood Screws*
12 M6 Allen Hex
Socket Head Screws
12 Panel Brackets
ACCESSORIES/KITS
ZK3SN369VLH Left-hand Single Door Bottom Freezer
Stainless Steel door panel kit
ZK3SN364VRH Right-hand Single Door Bottom Freezer
Stainless Steel door panel kit
HANDLE DESIGN GUIDE (CUSTOM PANEL MODELS ONLY)
Custom Panels require a custom handle from a cabinet
maker or the use of the ZKPN - Handle Mounting
Kit (sold separately) if you are using the Monogram
Statement or Minimalist handles (sold separately).
For custom handle installation, counter-bore holes in rear
of decorative panels. Ensure 1/2" (1.27cm) material thick-
ness remains for handle support.
NOTE: The counter-bore must not exceed 1" (2.54 cm) in
diameter.
1/4"
(0.64cm)
3/4"
(1.91cm)
* Used for Custom Panels only. Use M4 machine screws
for stainless steel panels (included in door panel kit).
1/2"
(1.27cm)
12 M5 Horizontal Adjustment
Screws
6 M5 Vertical Adjustment Screws
12 Large Washers
ZKSB3H3CVSS Minimalist handle kit (Single Door)
ZKSB3H3PVSS
Minimum distance from
panel side edge to handle
center should be 1-1/2"
(3.81 cm) as shown.
60
6 Door Trims
12 Trim Caps
M4 Allen Wrench
M5 Allen Wrench
Statement handle kit (Single Door)
Hinge
Side
31-1000708 Rev. 0
1-1/2"
Handle
Side