Hürner HST 300 HP 2.0 Manuel Utilisateur page 46

10.2 Understanding the "Recording" Sub-menu
"Welder Code on" means that the welder identification
code has to be entered as set with "Welder Code Op-
tions," "off," that this is impossible.
"Commission Number on" means that the commission
number (job number) will have to be entered or con-
firmed before every new welding, "off" that the user
is not prompted to enter it.
"Joint Number on" means that the unit assigns an auto-
matically incremented joint number to every welding
operation belonging to a commission already known,
and displays this number on the screen next to the
report number, "off" that no joint numbers will be
assigned at all.
"Additional Data on" means that the additional data will
have to be entered or confirmed before every new
welding, "off" that the user is not prompted to enter
them.
"Fitting Code on" means that the second, so-called trace-
ability code of the electrofusion fitting has to be
entered before every welding, "off," that this is not
possible.
"Pipe Codes on" means that the codes of both pipes/
components (ISO-compliant welding and treaceability
codes) have to be entered before every welding, "off,"
that this is not possible.
"Pipe Length on" means that the length of both pipes/
components has to be entered before every welding,
"off," that this is not possible.
"Weather Conditions on" means that the weather has to
be selected in a list before every welding, "off," that
this is not possible.
"Installing Company on" means that the company that
performs the installation work has to be entered before
every welding, "off," that this is not possible.
"Print Tags – M – " means that by pressing the MENU key,
the user can access a sub-menu for starting to print (a)
label(s) with reference to a given welding operation,
with the optional label tag printer.
All data can also be read from a bar code with the
scanner, provided such a bar code is available.
Info
22
EN
HÜRNER HST 300 HP 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Data Recording
Welder Code
>Commission No.
Joint No.
Data Recording
Additional Data on
>Fitting Code
Pipe Codes
Data Recording
Pipe Length
>Weather Cond.
Installing Comp.on
Data Recording
>Installing Comp.on
Print Tags
Version September 2022
on
on
off
Display 23
on
on
Display 24
on
on
Display 25
-M-
Display 26