Publicité
Les langues disponibles
Les langues disponibles
At "Settings," the parameters related to the welding unit
itself and its operation can be set. At "Recording," the
traceability data that have to or need not be recorded
and written into the reports can be enabled or disabled.
The desired sub-menu is selected using the ñ and ò arrow
keys. Then to access that sub-menu, press the MENU key.
In both parts of the configuration menu, use the ñ and
ò arrow keys to select the desired set-up option. Use the
ð arrow key to toggle between "on" and "off" for that
set-up option.
If a "M" is shown next to a set-up option, this indicates that
a sub-menu is accessible here by pressing the MENU key.
Press the START/SET key to confirm the set-up and save it
to memory.
10.1 Understanding the "Settings" Sub-menu
"AutoWeld on" means that the AutoWeld feature for the
easy definition of welding parameters (see Sect. 5.5)
can be used, "off," that the feature is not available.
"Check Code Expiry on" means that the welder identifica-
tion code has to be current and not expired (default
period of validity 2 years from code issuance), or the
welding operation cannot be started, "off," that the
validity of the code is not checked at all.
"Memory Control on" means that when the system
memory is full of reports, the unit will be blocked until
the reports are printed or downloaded, "off," that it
works but that the oldest report will be overwritten.
"Manual Input on" means that the manual input of weld-
ing parameters (see Sect. 7) is possible, "off," that the
manual input is not allowed.
"Welder Code Options – M – " means that by pressing the
MENU key, the user can access a sub-menu that allows
determining when the welder code, if it is enabled at
"Recording," has to be entered:always, i. e. before evey
single welding operation, only before the first welding
operation after switching the unit on or only after the
first welding operation of a new day/date.
"Language – M – " means that by pressing the MENU key,
the user can access a sub-menu for selecting the display
and report language (see Sect. 10.1.1).
"Date/Time – M – " means that by pressing the MENU key,
the user can access a sub-menu for setting the clock
(see Sect. 10.1.2).
"Buzzer Volume – M – " means that by pressing the MENU
key, the user can access a sub-menu for setting the
volume of the status buzzer (see Sect. 10.1.3).
20
EN
HÜRNER HST 300 HP 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
***
SET-UP MENU ***
>AutoWeld
Check Cd Expiry off
Memory Control
***
SET-UP MENU ***
Manual Input
Wldr Code Option-M-
>Language
***
SET-UP MENU ***
Date/Time
Buzzer Volume
>Temp. Unit
***
SET-UP MENU ***
>Temp. Unit
Inventory No.
Number of Tags
Version September 2022
on
on
Display 16
-M-
-M-
Display 17
-M-
-M-
-M-
Display 18
-M-
-M-
-M-
Display 19
Publicité
