Publicité
Les langues disponibles
Les langues disponibles
About indicator status
If an indicator turns on
If a problem occurs within the projector, it will be notified with the temperature indicator <WARNING TEMP.>,
the filter indicator <WARNING FILTER>, the shutter indicator <SHUTTER>, and the lamp indicator <LAMP
REPLACE>.
Check the status of the indicators and take the following action.
Attention
z Make sure to follow the procedures in "Powering off the projector" (
implementing measures.
z If multiple indicators have turned on or are flashing, check the status of each indicator and take the appropriate
action.
Note
z Check the power status with the power indicator <POWER>. (
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
All manuals and user guides at all-guides.com
About indicator status
page 34) to control the power when
page 32)
Power indicator <POWER>
Standby indicator <STAND-BY>
Temperature indicator <WARNING TEMP.>
Filter indicator <WARNING FILTER>
Shutter indicator <SHUTTER>
Lamp indicator <LAMP REPLACE>
ENGLISH - 77
Publicité
