Christie LX1750 Mode D'emploi page 41

Menu navigation
Menu navigation
Navigating through menu
■ Operating procedure z
1) Press the <MENU> button.
z
z The menu is displayed.
Input
PC adjust
Image select
Image adjust
Screen
Setting
Information
Network
Exit
2) Press ▲▼ to select the main menu
item.
z
z Select the item to adjust from [Input], [PC
adjust], [Image select], [Image adjust], [Screen],
[Setting], [Information], and [Network]. The
currently selected item appears with an orange
cursor, and the sub menu of the selected item
is displayed to the right-hand side.
3) Press the <SELECT> button.
z
z The sub menu is displayed, and the items on
the sub menu can be selected.
z Alternatively, press ▶ to access the sub menu. z
Input
PC adjust
Image select
Image adjust
Screen
Setting
Information
Network
Exit
4) Press ▲▼ to select the sub menu item
to change, then press the <SELECT>
button and ◀▶ to change the settings
or adjust the parameter values.
z
z For some sub menus, a further menu (sub
menu 2) containing advanced settings will be
displayed.
z
z For items where the setting can be changed
or there is a bar scale, the menu screen
disappears and, as illustrated below, an
adjustment screen for the selected setting
(individual adjustment screen) is displayed.
Fine sync
Exit Scroll
40 - ENGLISH
All manuals and user guides at all-guides.com
Language English
Menu position
Display On
Background Black
Lamp select Auto
Lamp power
Lamp interval
Off
Edge blending
Color matching
HDMI setup Normal
Logo
Normal
Fan control
Code 01
Remote control
Move Next Next
Language English
Menu position
Display On
Background
Black
Lamp select Auto
Lamp power
Lamp interval
Off
Edge blending
Color matching
HDMI setup Normal
Logo
Fan control Normal
Remote control Code 01
Move Next Next
Adjust Back
Note
z For certain formats of signal input to the projector,
it will not be possible to adjust some items or use
some functions. The menu items that cannot be
adjusted or used are grayed out, and cannot be
selected.
z Some items can be adjusted without a signal input.
z If no operation is performed for approximately four
seconds or ten seconds, the adjustment screen is
cleared automatically. The time until the adjustment
screen is cleared varies depending on the screen.
z For details on the sub menu items, refer to "Sub
menu" ( pages 41 to 43).

z A guide menu is displayed below the menu. Buttons
to be selected and executed are displayed.
(The guide menu of the sub menu is shown below.)
Exit Back Move
(1) (2) (3)
(1) Press the <MENU> button to close the menu.
(2) Press ◀ to return to the main menu.
(3) Press ▲▼ to navigate among the items.
(4) Press ▶ to adjust or select an item.
(5) Press the <SELECT> button to execute an item.
Next Next
(4) (5)
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)