Christie LX1750 Mode D'emploi page 76

[Information] menu
Select [Information] from the main menu on the
menu screen.
For operation of the menu screen, refer to
"Navigating through menu" (
z Press ◀▶ to switch the items.
Remote control
z You can also display sub menus using the
<INFO.> button on the remote control.
Confirming the settings and
usage state
Displays state of signals during projection, and current
settings.
■ [Input] z
Displays type of inputs and signals during
projection.
■ [System] z
Displays the status of the input signal during
projection.
■ [H-sync freq.] z
Displays H-sync frequency.
■ [V-sync freq.] z
Displays V-sync frequency.
■ [Screen] z
Displays the setting status of [Screen].
■ [Lamp select] z
Displays the current [Lamp select] setting status.
■ [Lamp power] z
Displays the current [Lamp power] setting status.
■ [Lamp interval] z
Displays the setting value of the automatic
replacement cycle of the lamp which is being
used.
■ [Lamp 1] z
Displays the usage time and status of the lamp 1.
■ [Lamp 2] z
Displays the usage time and status of the lamp 2.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
All manuals and user guides at all-guides.com
page 40).

Control panel
[Information] menu
■ [Lamp 3] z
Displays the usage time and status of the lamp 3.
■ [Lamp 4] z
Displays the usage time and status of the lamp 4.
■ [Language] z
Displays the current language.
■ [Filter counter] z
Displays the actual usage time of the filter.
■ [Power management] z
Displays the current [Power management] setting
status.
■ [Key lock] z
Displays the current [Key lock] setting status.
■ [PIN code lock] z
Displays the current [PIN code lock] setting status.
■ [Shutter management] z
Displays the current [Shutter management] setting
status.
■ [Remote control] z
Displays the current [Remote control] setting
status.
■ [Serial number] z
Displays the serial number of the projector.
■ [Option control No.] z
For details, refer to "Using the input module"
( page 30).

ENGLISH - 75