Publicité
Les langues disponibles
Les langues disponibles
Installing an input module (optional)
Installing an input module
■ Types of input module
z
Purchase an input module (optional) matching the input signals of the system.
Module name
SD/HD-SDI input module
Module number 103-132107-02
Input/output
BNC 2 Input system, BNC 1 Output system
terminal
SMPTE259M-C standard:
480-60i (59.94 Hz
SMPTE260M standard:
1035-60i (60/59.94 Hz
Compatible
SMPTE274M standard:
signal format
1080-24psf (48/47.95 Hz
1080-25p (25 Hz), 1080-30psf (60/59.94 Hz
1080-50i (50 Hz), 1080-60i (60/59.94 Hz
SMPTE296M standard:
720-60p (60/59.94 Hz
*1: V-sync frequency 60/59.94 Hz, 48/47.95 Hz, 24/23.98 Hz are automatically distinguished.
Note
z The preceding list shows the signal formats supported by the input modules. The signal formats supported by
the projector differ depending on the model. For more information, please consult your dealer.
■ Installation procedure
z
Disconnect the power before installing the input module.
1) Remove the slot cover.
2) Insert the input module.
z
z Firmly insert the input module into the slot, ensuring that the socket of the connection terminal engages
correctly with the plug within the projector body.
3) Fix the input module in place using two screws.
Attention
z Be sure to tighten the screws. Otherwise, the input module may fall off.
z An improper installation may result in damage to the input module.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
All manuals and user guides at all-guides.com
Installing an input module (optional)
*1
), 576-50i (50 Hz)
)
*1
*1
), 1080-24p (24/23.98 Hz
), 720-50p (50 Hz)
*1
Slot cover
Guide
Plug
*1
), 1080-25psf (50 Hz),
*1
), 1080-30p (30/29.97 Hz
*1
)
Socket
*1
),
ENGLISH - 29
Publicité
