Christie LX1750 Mode D'emploi page 37

Projecting
■ Adjusting the focus and zoom z
1) Press the <FOCUS> button and the <ZOOM> button on the remote control or the
control panel.
z
z [Focus] and [Zoom] are displayed on the screen for four seconds.
2) While the display appears, press ▲▼ to adjust the focus and zoom.
Note
z When [Display] is set to [Off], the adjustment screen will not appear.
z It is recommended that the images are projected continuously for at least 30 minutes before the focus is
adjusted.
z If the keystone effect occurs, refer to "Correcting the keystone effect" (
36 - ENGLISH
All manuals and user guides at all-guides.com
page 38) for details.

LX1750 User Manual
020-000638-01 Rev.1 (11-2013)