Christie LX1750 Mode D'emploi page 53

[Image adjust] menu
[Color temp.]
1) Press ▲▼ to select [Color temp.].
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
Operation Adjustment
Makes the color
Press ▶ .
temperature
higher.
Makes the color
Press ◀ .
temperature
very low.
Note
z [XLow] (emphasize red) - [High] (emphasize blue)
z Note that adjusting this item will also change the
white balance setting.
z [Adj.] is displayed when you adjust the white
balance (any of [Red], [Green], and [Blue]).
White balance ([Red]/[Green]/
[Blue])
1) Press ▲▼ to select [Red] (or [Green]
or [Blue]).
2) Press the <SELECT> button.
z
z The advanced menu is displayed.
z
z While the advanced menu is displayed, press
▲▼ to move backwards and forwards between
menus.
3) While looking at the screen, press ◀▶
to adjust the setting.
Operation
Press ▶ .
Weakens the color.
Press ◀ .
Deepens the color.
52 - ENGLISH
All manuals and user guides at all-guides.com
Range
[XLow]-[Low]-
[Mid]-[High]
Adjustment Range
Maximum
value 63
Minimum
value 0
[Offset]
1) Press ▲▼ to select [Offset].
2) Press the <SELECT> button or ▶ .
z
z The sub menu 2 is displayed.
3) Press ▲▼ to select [Red] (or [Green]
or [Blue]).
4) Press the <SELECT> button.
5) While looking at the screen, press ◀▶
to adjust the setting.
[Red] Minimum value 0 - maximum value 63
[Green] Minimum value 0 - maximum value 63
[Blue] Minimum value 0 - maximum value 63
[Auto picture control]
Emphasizes the dark parts of the projected image.
1) Press ▲▼ to select [Auto picture
control].
2) Press the <SELECT> button.
3) Press ◀▶ to switch the setting.
z
z The setting will change as follows each time
you press the button.
[Off] [L 1]
z
z The effect is strongest with [L 2].
[Advanced color]
Sets the operation of the color control device that
independently controls the quantity of yellow light.
1) Press ▲▼ to select [Advanced color].
2) Press the <SELECT> button.
3) Press ◀▶ to switch the setting.
z
z The setting will change as follows each time
you press the button.
[Off]
z
z The white balance may change depending on
the image.
[L 2]
[Auto]
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)