Publicité
Les langues disponibles
Les langues disponibles
[Input] menu
[Input] menu
Select [Input] from the main menu on the menu
screen, and select the item from the sub menu.
For operation of the menu screen, refer to
"Navigating through menu" (
z After selecting the item, press ▲▼◀▶ to make
the setting.
Remote control
[Input 1]
1) Press ▲▼ to select [Input 1], and
press the <SELECT> button.
z
z The sub menu 2 is displayed.
2) Press ▲▼ to select an item, and press
the <SELECT> button.
Select when inputting an analog
[RGB(PC
signal from a computer to the
analog)]
<ANALOG IN> terminal.
Select when inputting SCART
[RGB(Scart)]
signal to the <ANALOG IN>
terminal.
Select when inputting a digital
[RGB(PC
signal from a computer to the
digital)]
<DIGITAL (DVI-D) IN> terminal.
Select when inputting an HDCP-
[RGB(AV
compatible digital signal to the
HDCP)]
<DIGITAL (DVI-D) IN> terminal.
Select when inputting an HDMI-
[HDMI]
compatible digital signal to the
<HDMI IN> terminal.
Note
z The SCART21 pin terminal is a video output
terminal provided in video players sold mainly in
Europe. To view RGB output from this terminal on
the projector, connect the SCART21 pin terminal
of the video player to the <ANALOG IN> terminal
of the projector using a dedicated cable. The RGB
SCART signals to be played via the <ANALOG IN>
terminal are limited to 480i and 576i RGB signals.
Composite video signals cannot be played back.
44 - ENGLISH
All manuals and user guides at all-guides.com
page 40).
Control panel
[Input 2]
1) Press ▲▼ to select [Input 2], and
press the <SELECT> button.
z
z The sub menu 2 is displayed.
2) Press ▲▼ to select an item, and press
the <SELECT> button.
Select when inputting an analog
[RGB]
signal from a computer to the
<G,B,R,H/V,V IN> terminal.
Select when inputting a composite
[Y,Pb/Cb,Pr/
video signal to the <Y,Pb/Cb,Pr/Cr
Cr]
IN> terminal.
Select when inputting a composite
[Video]
video signal to the <VIDEO IN>
terminal.
Select when inputting an S-video
[S-video]
signal to the <S-VIDEO IN>
terminal.
Note
z While some RGB signals are automatically
recognized, unrecognized RGB signals are
detected as "Y,Pb/Cb,Pr/Cr" and it is necessary to
select [RGB] from the menu.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
Publicité
