Publicité
Les langues disponibles
Les langues disponibles
About your projector
Remote control
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
All manuals and user guides at all-guides.com
(1) Remote control signal emitters
(2) Remote control indicator
Flashes by pressing any buttons.
(3) <LIGHT> button
Press once to light the control buttons for ten seconds.
(18)
(4) Power <ON> button
Starts projection when the main power switch on the projector is set to
(19)
standby mode.
(20)
(5) <SHUTTER> button
Opens and closes the shutter. (
(7)
(6) <MENU> button
(21)
Displays the menu screen. (
(7) ▲▼◀▶ button
(22)
Move the cursor on the on-screen menu and control menus.
(23)
Also move the image vertically and horizontally in the digital zoom mode or the real mode.
(8) <LENS SHIFT> button
Slides the lens vertically and horizontally to move the position of the projective image
vertically and horizontally. (
(24)
(9) <FOCUS> button
Adjusts the focus. (
(10) <ZOOM> button
Adjusts the zoom of the lens. (
(11) <FREEZE> button
Temporally freezes the projected image. (
(12) <D.ZOOM> button
Turns on the digital zoom mode.
(13) <P-TIMER> button
Press the <P-TIMER> button to count the time elapsed from the press of the button or
perform a countdown from the set time. (
(14) <KEYSTONE> button
Corrects the keystone effect. (
(15) <INFO.> button
Displays state of signals during projection and current settings. (
(16) <ON>/<OFF> switch
(25)
Set to <ON> when using the remote control.
Set to <OFF> when not using the remote control for a long period.
(17) Wired remote control terminal
When the remote control is used as a wired remote control, connect this terminal on the
remote control to the <R/C JACK> terminal on the projector.
The remote control requires batteries. (
(18) Power <STAND-BY> button
Sets the projector to the standby mode when the main power switch on the projector is set
to
and in the projecting mode.
(19) <SCREEN> button
Selects the size of the projected image.
If you press the button for at least five seconds, the settings of the [Screen] menu return to
the factory default settings. (
(20) <AUTO PC> button
Automatically adjusts synchronization, total number of dots, horizontal shift, and vertical
shift. (
page 46)
(21) <SELECT> button
Selects item indicated by the cursor on the on-screen menu.
Also used to expand and contract the image in the digital zoom mode. (
(22) <IMAGE ADJUST> button
Displays the [Image adjust] menu to adjust the image. (
(23) <IMAGE SEL.> button
Selects the mode from [Image select]. (
(24) <INPUT 1> - <INPUT 4> buttons
Selects the input signal to project. (
(25) Number (<0> - <9>) buttons
Used to enter PIN codes and remote control numbers.
About your projector
page 37)
page 40)
page 35)
page 36)
page 36)
page 37)
page 39)
page 38)
page 23)
page 39)
page 38)
page 37)
and in the
page 39)
page 40)
page 34)
ENGLISH - 19
Publicité
