Create KAMADO Manuel D'utilisation page 12

Coal Bucket Assembly
Before assembling the charcoal bucket, place the kamado on the wheel base, with the help
of another person, since this product has a lot of weight, in this way the kamado will weigh
less at the time of assembly and will be easier to transport.
3
2
1
1. Insert the charcoal grate, the top ring of
the kamado and then the cooking grill
into the charcoal bucket.
Handle assembly
3. Remove the nuts that are placed on the
kamado where the handle goes.
Air outlet mounting
5. Place part 13 on top of the kamado's air
outlet and carefully screw it down with
screws C and brake nuts D one on each
side. Make sure the piece is tight but do
it carefully.
E NGL I SH
12
2. Once the cube is assembled, insert it into
the body of the kamado, being careful
not to pinch your fingers.
4. Place part 1 fitting the holes in the
screws that protrude from the kamado
and screw the nut until the handle is well
attached.
3
1
C
D