Replacement Of The Burner Nozzle - Angelo Po 191BR1GA Manuel D'utilisation Et D'installation

REPLACEMENT OF THE BURNER NOZZLE

To carry out this operation,
proceed as follows.
1 - Turn off the gas supply
tap.
2 - Undo the screws (C)
and remove the control
panel (D).
3 - Unscrew the nozzle
(E) and replace it with
the one suitable for the
type of gas in use (see
table at back of manu-
al).
4 - Replace the control
panel (D) on completion of the operation.
REPLACING THE BURNER AIR BUSHING (291BR1GA - 291BR2GA-291BR3GA)
To carry out this operation,
proceed as follows.
1 - Turn off the gas supply
tap.
2 - Undo the screws (C)
IT
and remove the control
panel (D).
GB
3 - Undo the screw (E).
4 - Extract the bushing (F)
DE
and replace it with the
one suitable for the
type of gas in use (see
FR
table at back of manu-
al).
ES
5 - Tighten the screw (E).
6 - Replace the control panel (D) on completion of
the operation.
English
C
C
- 30 -
D C
D C
E
IDM-39616201600.tif
F E
IDM-39616201700.tif