Adjustments - Angelo Po 191BR1GA Manuel D'utilisation Et D'installation

RECOMMENDATIONS FOR ADJUSTMENTS
Important
Before making any type of adjustment, acti-
vate all the safety devices provided and de-
cide whether staff at work and those in the
vicinity should be informed. In particular,
turn off the gas supply tap, cut off the elec-
ADJUSTING GAS VALVE MINIMUM SETTING
Important
This adjustment is only required if the
type of gas to be connected is different
from that used for testing after the con-
version procedure has been carried out
Natural and bottled gas
Proceed as follows.
1 - Turn off the gas supply tap and switch off the
IT
main electricity supply.
2 - Undo the screws (C) and remove the control
GB
panel (D).
DE
FR
ES
English

ADJUSTMENTS

tricity supply using the master switch and
prevent access to all devices that might
cause unexpected health and safety haz-
ards if turned on.
(see page 25). Before making this adjust-
ment, check that the gas supply pressure is
the same as the rated pressure for the type
of gas in use (see table at back of manual).
- 26 -
C
8
A
D C
IDM-39616201200.tif