Panasonic SD-ZB2502 Notice D'utilisation page 36

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 101
Troubleshooting
Before calling for service, please check through this section.
Problem
appears on the display.
01 appears on the display.
H01–H02 appears on the
display.
U50 appears on the display.
36
There has been a power failure for approx. 10 minutes (the plug has been accidentally pulled
out, or the breaker has been activated), or there is another problem with the power supply.
The operation will not be affected if the problem with the power supply is only momentary.
The Bread Maker will operate again if its power is restored within 10 minutes, but the end
result may be affected.
There has been a power failure for a certain amount of time (differs depending on the
circumstances - e.g. mains power failure, unplugging, malfunctioning fuse or breaker).
Remove the dough and start again using new ingredients.
The display indicates a problem with the Bread Maker.
Consult the place of purchase or a Panasonic service centre.
The unit is hot (above 40°C/105°F). This may occur with repeated use.
Allow the unit to cool down to below 40°C/105°F before using it again (U50 will disappear).
Cause  Action

Publicité

Table des Matières
loading

Table des Matières