Kessel 99 403.10 Guide Pour L'installation page 29

Transportation of the KESSEL separator should be handled
only by a transporter who has the proper knowledge, equip-
ment and employees to handle such a product. During trans-
port the separator must be firmly fixed into position and must
not be allowed to move or shift in place. It also must be pro-
tected from other objects coming in contact with the separator
during transport.
If and when the separator is lifted it is important to follow the
following correct procedures: The separator is not to be lifted
with the use of steel cables or chains. Proper equipment are
heavy duty cloth or hemp straps designed to handle the corre-
sponding loads. The separator should be lifted by placing the
proper straps beneath the inlet and outlet of the separator as
seen in the illustration. Do not lift the separator by the small
holes between the two manholes covers as illustrated on this
page. In instances where a forklift is used, secure the separator
to the forklift with appropriate cloth / hemp securing straps.
2020/09
Transport and Storage
In cases where the separator needs to be temporarily stored
before installation, it is important that the separator is placed
on firm level ground and in an area where it is protected from
coming in contact with other objects. Storing the separator
outdoors will not cause any problems.
29/120
010-222