General Dynamics SIMUNITION FX 9004 Guide D'utilisation page 9

FX ® 9004 Helmet, Head Protector
Note: Two procedures can be utilized to clean the FX
Procedure 1 is called Mask's Light Cleaning and Procedure 2 is called Mask's Complete Cleaning.
Procedure 1
Mask's Light Cleaning is used to clean the FX
•
the Anti-soap Baffle (8972253SP)
•
the Goggle Assembly (8971021SP) (though the Goggle's close cell foam shall be removed)
•
the three (3) add-on parts (8972344SP) onto the face mask.
All other components should be removed for cleaning.
Procedure 2
Mask's Complete Cleaning is used to clean the FX
dismantled from the face shield.
© 2022 General Dynamics-OTS Canada
Cleaning Instructions for the
®
FX 9004 Helmet, Head Protector
®
For use in FX
®
FX
DO NOT USE WITH ANY OTHER TYPE OR CALIBER OF AMMUNITION.
®
9004 Helmet, Head Protector, without removing:
Registered trademarks of General Dynamics Ordnance and Tactical Systems-Canada Inc. are denoted by
interactive training with 9mm, .38 cal. and 5.56mm Simunition
Marking cartridges and FoF Marking cartridges only.
®
9004 Helmet, Head Protector assembly.
®
9004 Helmet, Head Protector, assembly with all components
www.simunition.com
.
®
Page 9 of 52
8972330.FTSIM_rev00
®