Mounting; Install The Manual Disconnect - LiftMaster LOGIC 5.0 T Manuel D'installation

MOUNTING

1
Place the door sprocket on the door shaft.
2
Wrap the drive chain around the door sprocket and the drive
sprocket then secure with the master link.
3
Align the door and the drive sprockets. Insert keys and fasten
the sprockets with the set screws (recommended torque for
the set screws is 34-45 in/lb).
NOTE: It is highly recommended to add a thread adhesive to
secure the set screws in place.

INSTALL THE MANUAL DISCONNECT

1
Fasten Door retaining bracket 4 feet (1.2 m) above the floor.
1
1
Door retaining bracket
3
2
Door retaining bracket
18 Typical Installation - Hoist and Jackshaft