Mounting Brackets - LiftMaster Logic 5.0 GSD Mode D'emploi

ACCESSORIES

MOUNTING BRACKETS

Heavy gauge steel bracket for vertical or horizontal
10-12360
mount on either front or top of coil on a rolling door.
Has a variety of mounting hole patterns compatible
with many OEM manufacturers. For use with J, H, DJ,
and DH operators. May be welded.
08-9098
Cast iron bracket to mount J, H, DH, DJ, and GH side
mount operators on end bracket of a rolling door or
grill. For vertical or horizontal mount on either front or
top of coil. Cannot be welded.
Same as 08-9098, but with adapter plate to hold
08-9098EZ
mounting bolts in place for easy mounting.
Heavy gauge steel bracket for vertical or horizontal
1A4324
mount on either front or top of coil on a rolling
door. May be welded. For use with J, H, DJ, and DH
operators.
Same as 1A4324, but with adapter plate to hold
1A4324EZ
mounting bolts in place for easy mounting.
CHAIN TENSIONERS
71-6023 For 1" (2.5 cm) shafts. Recommended to properly
tension drive chain between operator shaft and
door shaft.
Same as 71-6023, but for 1-1/4" (3.2 cm) shafts.
71-6125
OPTION CARDS
Timer Light Status Card
TLS1CARD
The TLS option card provides special functionality
to activate and fl ash auxiliary devices such as
lights, bells, and horns/strobes at various door
positions, and to provide special timer functions.
Auxiliary Contact Card
AUXCARD
The Auxiliary Contact option card has both Normally-
Open and Normally-Closed contacts that actuate
when the door is idle, opening, or closing.
For Jackshaft Type Operators
36
ADDITIONAL CONTROL ACCESSORIES
86LM (15' [4.6 m]) Antenna Extension Kit
86LMT (25' [7.6 m])
The antenna extension kit can be used with EXT-ANT
for maximum radio receiver range.
RGL24LY Red/Green Traffic Light
Indicates when a commercial door reaches the
open position. Provides assurance of safe entering
and exiting of the facility, reducing the potential for
costly accidents. (TLS1CARD is recommended)
RGL-CTL Red/Green Traffi c Light-Compact
Similar to RGL24LY function, but high-intensity
LEDs and fully sealed enclosure. Ideal for single lane
operations that require focused visibility.
50-HERK2 Motion Detector 24V
Microwave motion detector with two independently
programmable channels.
50450 Switch Sectional Door Interlock
NEMA 4 switch disables operator control circuit
when door is locked preventing electrical operation
of the door.
Accessories