Attach The Track To The Header Bracket; Hang The Operator - LiftMaster LOGIC 5.0 T Manuel D'installation

ATTACH THE TRACK TO THE HEADER BRACKET AND HANG THE OPERATOR
1
Align the track with the header bracket.
2
Insert the clevis pin through the track and header bracket
holes. Secure with the fasteners.
3
Swing the operator up and ensure the operator is level.
4
Secure the operator using the appropriate fasteners and
locking hardware to support the weight of the operator.
4
3
To avoid possible SERIOUS INJURY from a falling operator:
• Fasten the operator SECURELY to structural supports of the
building.
• Concrete anchors MUST be used if installing ANY brackets
into masonry.
A
B
2
1
12
HARDWARE
Clevis Pin (1)
Cotter pins (2)
B
A
Typical Installation - Trolley