Trolley Operators; Carton Inventory; Operator Specifications - LiftMaster LOGIC 5.0 T Manuel D'installation

TROLLEY OPERATORS

CARTON INVENTORY

Before beginning installation confirm all components are enclosed.
DESCRIPTION
Operator assembly
Installation manual and caution labels
Hardware box (includes fasteners, track spacers, trolley, door arm assembly, front idler and header mounting bracket)
3-Button control station with MAS LED
LiftMaster Monitored Entrapment Protection (LMEP)*
Trolley drive chain: #48 for 1/2 HP, #41 for 3/4 HP and higher (all GT models)
NOTE: The tracks are shipped separately.
* Based on customer order.
** Additional accessories may be included.

OPERATOR SPECIFICATIONS

DUAL VOLTAGE CONNECTIONS
Increase flexibility by enabling the installer to select the required
voltage, within phase, to meet job-site requirements.
MODEL VOLTAGE
APT • •
T • • • •
GT • • • •
TYPE: Continuous duty
ELECTRICAL
TRANSFORMER: 24Vac Secondary
CONTROL STATION: NEMA 1 General Purpose 3-Button Control
Station Open/Close/Stop w/MAS LED
WIRING TYPE: C2 (Factory default), B2, T, TS, D1, E2 and
FSTS. See page 29 for more information
regarding wiring types.
BRAKE: Standard on APT, GT and 3/4-1 HP T's.
Optional on 1/2 HP T.
DISCONNECT: Quick disconnect door arm for emergency
manual door operation.
Carton Inventory/Operator Specifications - Trolley
HZ HP PHASE
• • •
• • • • • •
• • • • • • •
MECHANICAL
DRIVE REDUCTION:
Model APT First-stage heavy-duty 5L V-belt; second and
third stages #41 chain; #48 output chain on trolley.
Model T First-stage heavy-duty 5L V-belt; second #41 chain;
#48 (for 1/3 and 1/2HP) and #41 (for 3/4 and 1HP) output
chain on trolley.
Model GT 10:1 first-stage using heavy-duty gears running
in oil bath; cast iron housing; #41 chain second stage; #41
•
output chain on trolley.
•
OUTPUT SHAFT SPEED:
Model APT:
Model GT:
Model T:
DOOR SPEED (NOT ADJUSTABLE):
Model APT:
Model GT:
Model T:
LIMIT ADJUST:
BEARINGS:
5
96 RPM
113.5 RPM
140 RPM
6-7" (15-18 cm) per second
11-12" (28-30.5 cm) per second
11-12" (28-30.5 cm) per second
Linear driven with adjustable limit nuts up to
24 feet (7.3 m).
Models APT and T - Industrial ball bearings
on output shaft, heavy-duty oil-filled bushing
on reduction shafts.
Model GT - Sealed roller bearings in gear
reducer. Flange-mount industrial ball bearings
on drive shaft.